Month: July 2015
Dryer Master Experiences: Anthony in Ohio
Anthony has 2 Dryer Master DM510 systems, the first of which he added in 2007. He runs them on his two Zimmerman dryers, drying about 1.5 million bushels/year of corn and soybeans. This year he will be adding the DM Mobile remote access functionality so that he can check on his dryers at any time from anywhere.
Why did you buy a Dryer Master in the first place?
We purchased DM because any of the factory controls we had tried just did not work. We spoke to a neighbor that was running a DM at the time and they were completely satisfied. The DM was money well spent and I would not run without.
How does the Dryer Master change the way that you dry, or help your drying operations from an operational perspective?
The DM allows me to be more available during harvest season. I do not have to babysit the dryers all day and night. I just have much more confidence in the DM sensors and don’t feel I have to check constantly.
How often do you calibrate the moisture sensors?
I try and calibrate every chance I get. It seems once the dryers have been running a while I have to calibrate less often. I try to check it every couple hours.
And what is your calibration procedure?
My sampling procedure is this, for the input sensor I take several samples from the leg that is feeding the dryer. I average the moistures and wait about 12 min and start the calibration on the DM.
For the output sensor I hit the green button and take small samples the entire time the light is flashing (30 seconds). I run that sample through the tester about 3 or 4 times and enter in the average moisture.
You run two dryers. How do you allocate product between the dryers?
Normally for the first half of harvest one dryer is drying corn and the other soybeans. When I have them both in corn If we are harvesting inconsistent moistures I try to keep one drying higher moisture and one in the lower. We then unload both dryers into the same bin to get some blending between both of them.
Have you found a financial difference in your drying performance using Dryer Master? In what way?
The DM system has saved us time and money. I have consistent moistures coming out of the bin, we are not over drying like we did with previous controls, and the system is user friendly.
Dryer Master Experiences: Jon in Ontario
Jon is relatively new to Dryer Master but he is great example of how moisture control is no longer just for big elevators, and how more and more it is making its way into smaller operations.
Jon has a DM510 system and has had it for 2 seasons now. He added it as a retrofit onto an MC dryer and dries about 300,000 bushels a year of corn and soybeans.
Why did you
buy a Dryer Master in the first place?
We had been having issues with the original controller, the dryer had to be babysat 24/7. With just myself looking after the elevator during harvest it became very necessary to find a controller that I could trust so that I could get some sleep and be functional the next day.
How does the Dryer Master change the way that you dry, or help your drying operations from an operational perspective?
It has given me a lot more confidence in my drying system which allows me focus on other parts of the system which need my attention during the course of the day. Once its up and running I check the calibration once in the morning and once more before I head to the house for the night. With the Dryer Master running I just don’t stress about my dryer anymore.
Did anything surprise you about how your Dryer Master worked when you first used it?
I thought it would be more complicated to run than it is. I was completely comfortable running the system within just a couple of hours. The over the phone support is great, everybody at Dryer Master seems to know the system like the back of their hand.
What drying tips (if any) would you like to pass on to other dryer owners about how to get the most out of their dryer and/or their Dryer Master?
Give the system time to react if you make changes to the settings. 1-1.5 hours depending on how fast the dryer is running. Too many changes in a short period of time will have you frustrated and chasing your tail. Once the Dryer Master is up and running it takes very little interaction to keep it going. Let it work and find something else to fuss over.
Have you found a financial difference in your drying performance using Dryer Master? In what way?
The biggest financial gain for us would be the accuracy that it can discharge grain at the correct moisture. We have noticed that when shipping grain out, our bins are much more even top to bottom, with no wild swings in moisture. Over and under drying used to cost us every year, now its pretty much a non issue.
Do you use DM Mobile? If so how do you use it (phone/PC/home/at night?)
Yes, definitely. This is a huge benefit to my operation. I use it throughout the day from my Iphone, and also at night from my Ipad or Iphone. I can wake up a couple times through the night, see whats happening and get back to sleep. It has made the harvest season mush easier to get through. My days run much smoother because I’m not completely exhausted from being up all night with the dryer.
Dryer Master Experiences: Myron in Illinois
Myron has worked with Dryer Masters systems for over 10 years. He currently uses two DM510s on two Zimmerman 4500 tower dryers, typically drying around 4 million bushels of corn a year. In the first photo you have the DM510’s sitting side by side, along with the printers that Myron makes good use of. The bottom picture shows a slightly unusual sensor placement (the conduit runs to the back of the moisture sensor).
How does the Dryer Master change the way that you dry, or help your drying operations from an operational perspective?
We can generate a printout tape to evaluate the functions over night or during the day. To monitor moisture ranges.
Did anything surprise you about how your Dryer Master worked when you first used it?
The ease of operation.
What drying tips (if any) would you like to pass on to other dryer owners about how to get the most out of their dryer and/or their Dryer Master?
During start up – give it plenty of time to learn and if possible they work the best if you don’t shut down, and run 24 – 7.
Have you f
ound a financial difference in your drying performance using Dryer Master?
Yes, more consistent for moisture blending.
Dryer Master 
You must be logged in to post a comment.